RZR 570 / 800 Winch Mount Kit by Quad Logic

This heavy gauge steel winch mount kit allows you to mount just about any brand of winch as long as it is the standard (3" x 4.875") 4 bolt pattern winch. Will not allow installation of 2 bolt models or the large wide drum 4 bolt models such as the Warn 4.0 (6"bolt pattern). This kit tucks the winch up behind the plastic for a very nice, clean installation. All mounting hardware and instructions are included. Black powder coated finish.

Roller fairlead and winch are NOT included, mount only.

Note: This mount works with the following winches:

• KFI: ST17 / A2000 / A2500-R2 / A3000 / U45-R2 / SE25 / SE35 / SE45-R2
• KFI: AS-50
• WARN: A2000 / A2500 / U2500 / 1.5ci / 2.5ci / 2.5ce / 3.0ci / 3.0ce / 3.0s
• WARN: RT15 / RT25 / RT30 / XT15 / XT25 / XT30
• WARN: Vantage 2000-3000lbs / Provantage 2500-3500lbs
• RAMSEY : ATV2500 / ATV3000
• SUPERWINCH : Terra25 / Terra35 / LT2500 / LT3000 / LT4000ATV
• MILE MARKER : PE2.5 / PE 3.5 / VMX2.5 / PE2500 / PE3500
• CYCLE COUNTRY : Work Power 1500 and 2500 / Powermax 2500, 3500
• BADLAND : 3000lb #68145 / 3500lb #61257 / 3500lb #61383
• KEEPER CORP. TRAKKER : KT2500 / KT3000 / KT2500C / KT3000C
• CHAMPION : C10013 / C10014 / C10018 / 10020 / 10024 / 12053 / 12503 / 12551 / 13004 / 13050 / 13502 / 13501 (requires rollers) / 14061 / 14001 / 14051 / 14560
• SMITTYBILT : XRC 3.0 / XRC 4.0
• XGEAR: X3000 / X4000
  • 4-Hole Standard (3.00″ x 4.875″ bolt pattern)
• VENOM: 2000 / 2500 / 3000 / 3500 / 4000 / 4500 / 5000 (Standard ONLY)
  • 4-Hole Standard 3.00″ x 4.875″ bolt pattern with rollers that are 4.875″ bolt pattern
• Possibly many others with the below standard mounting patterns, call to confirm.
  • 4-Hole (3.00″ x 4.875″ bolt pattern with rollers that are 4.875″ bolt pattern)
• QUADBOSS: RP25 / RP35